STC-1000

Product Information

If it’s too hot, the controller will turn on a cooling device. Electrical current will flow to the refrigerator to cool down the fermentation vessel. Elitech STC-1000X temperature controller is suitable for aquarium, seafood machine, aquaculture, hatchery/incubator farming, greenhouse planting, brew, ferment, fridge, freezer, slow cooker, AC systems and other scenes that need to control the temperature. The temperature controller helps regulate the temperature of your fermentation vessel so you don’t wind up with off-flavors or stalled fermentation. If measured temperature temperature set-point, the controller stops heating and cooling indicator is off.

We’re a team of passionate brewers & distillers who want to share our learnings with others – helping answer some of the questions we had to figure out the hard way! Flip the pro mini upside down and the pins should line up (note: rx goes to tx and tx to rx, the others should match) The controller allows you to regulate temperature with precision and consistency, which can help improve the quality of your product. In the past, I made a review and manually for the generic OEM version of the STC-1000She had a good rating, and I have a good experience with her.The aim of the comparison between Elitech and the “Generic version” is to find out whether one is just a plain copy or Elitech has some added value. A completed Arduino UNO programmer setup. Note that the pinheader is 6 pin, that is what I had around, only 5 pins are used though. Arduino NanoPrevent a stalled fermentation: Too cold a wash can cause yeast inactivity, resulting in a stalled ferment. When the temperature of your wort drops below the ideal temperature, the controller increases the temperature, so it continues fermenting.

The main visible difference is that the power supply to the Elite has a large brown while the generic version of the thermostat has smaller yellow with electronics around (which is better I do not know) STC1000 from Elitech had completely different PCBs with other components than the generic STC1000.Here’s a comparison on photos: Generic is left and Elitech is rightNyní popíšu termostat a ovládání, pokusím se přesně popsat. Zařízení STC 1000 obsahuje pět hlavních komponent: The material I use, Arduino pro mini, CP2102, 5 pin dupont cable and heat shrink tubing (optional). Ve své recenzi popíšu své dvouleté zkušenosti s regulátorem teploty STC 1000. V tomto článku si můžete přečíst výhody a nevýhody produktu, příručku a návod k vedení, jak ji nastavit a kde koupit.