Aurora AU-GUF4011LED/30 240V SGU10 7W Warm White LED Bulbs - Replacement for AU-GUF4011/30

Product Information

Fully compliant with the Part L1 and 40Lm/W! These new energy saving Luna Lamps from Aurora Lighting can be used with the Fire Rated Downlights (see the Aurora Part L1 AU-DLM841 and Aurora Part L1 AU-DLM843), and offer the following light colours: Cool White, daylight white, and warm white. Product Overview This Aurora SGU10 bulb is specifically designedfor special SGU10 lampholders thatprevent theinsertion of standardinefficientGU10 halogen bulbs thereforepromoting the use of energy efficient lighting. PETG is probably the best in terms of strength and temperature resistance. LED lights don't really get hot though, and honestly any of them will work fine.

We have professionally recommended supplies from Aurora Lighting of cables, bulbs, fittings, adaptors and much, much more. No matter if you're a trained electrician, doing some maintenance for your business or just making some home improvements, you'll find exactly what you need to create the perfect light installations. Well the good news is i've been able to swap over the 20 downstairs fittings for standard GU10s myself, easy enough job. Energy-saving LED replacement for the 11W GU10 compact fluorescent bulb. This Aurora SGU10 bulb is specifically designed for special SGU10 lamp holders that prevent the insertion of standard inefficient GU10 halogen bulbs, therefore, promoting the use of energy-efficient lighting. Free collection in 2 - 5 working days from our Hampton Hill (Middlesex) or Chessington (Surrey) Branches We are unable to deliver to the Isle of Scilly, Jersey, Guernsey, Northern Ireland, Isle of Man and the rest of Europe.Lumens per Watt output allows compliance with the Building Regulations Approved document L1A/B requiring the use of energy efficient luminaires in dwellings.

Finally after months of trying to find this bulb I found it . Fits perfect saves me replacing entire unit. Great service . Obviously just placed in should have a long life of up to 5 years or more My kitchen came fitted with these bulbs and I have about a dozen fittings in all. They are expensive to replace compared to GU10 standard bulbs which don't fit the housing. In five years I have needed to replace about half of them, but these are some of the best value I've found. Recently moved into a new house I have discovered many of the light fittings are SGU10 PAR20 bulbs. Specifically, they take Aurora AU-GUF4011/30 PAR20 bulbs for which there seems to be no alternative.Product Information This Aurora SGU10 is specifically designed for special SGU10 lamps that prevent the interstation of standard inefficient GU10 halogen bulbs, therefore promoting the use of energy efficient lighting. Product Overview This Aurora SGU10 is specifically designed for special SGU10 lamps that prevent the interstation of standard inefficient GU10 halogen bulbs, therefore promoting the use of energy efficient lighting. I have a feeling also called GU10L1 with a dimple in the centre, the old Part L building regulations required so many lights to be of a type where you could not fit non energy saving bulbs, so we got bayonet caps with three lugs, and GU10 with dimple in centre, blame the government, in theory all LED GU10 bulbs should have the dimple idea was you could fit LED in non LED but not the reverse, but it seems most EU countries did not adopt the idea, so most manufacturers did not make bulbs with the dimple. Aurora Ltd is an international lighting organisation, renowned for the development of LED lighting solutions. They have always been at the forefront of the lighting transition from traditional lighting to the energy saving smart lighting that is available today. Their wide product range covers many bases when it comes to lighting, from downlights to LED flat panels and both outdoor and indoor lighting. It seems prudent then as these fail to swap the fitting with a standard GU10 fitting. Can anyone recommend one that would fit the hole left by this existing fitting?