TP-Link JetStream 24-Port Gigabit L2 Managed Switch with 4 SFP Slots, Supports 24 Gigabit RJ45 ports, Rackmount (TL-SG3428)

Product Information

Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.

The querier is essential for IGMP Snooping to work properly. Usually, a router in the network can act as a querier. The switch can also act as a querier, but it is disabled by default, if you need to enable it, you can configure it as follows. For example, the show command can display information about many functions, you can enter the following command to view all the information that the show command can print, note that there is a space before the question mark, otherwise it is auto-completion. Note the Ethernet port type in the command is the native speed mode of the ports, not the current operating mode. For example, assuming the current speed mode of SFP+ port 25 is 1Gbps, to configure it, the command should be “interface ten-gigabitEthernet 1/0/25”, or simply “int te 1/0/25”. Use the configure command to enter this mode from Privileged EXEC mode, which allows doing global configurations such as STP, IGMP Snooping, etc. After entering part of a command, you can press the TAB key or a question mark (?) then the switch will automatically complete the command. If your input corresponds to more than one command, the switch will not auto-complete but will display all related commands.Feature Filter: All Configuration Guide User Application Requirement Further Assistance Troubleshooting When You Set Up FAQs Microsoft® Windows® 98SE, NT, 2000, XP, Vista™ or Windows 7/8/10/11, MAC® OS, NetWare®, UNIX® or Linux.

Qual è la differenza tra gli account Master Administrator, Administrator e Viewer in Omada Controller? 04-14-2023 16282 What's the difference between Master Administrator, Administrator and Viewer account in Omada Controller? 04-20-2023 16282 What should I do when the Omada Software Controller (V4) fails to discover the devices? 11-23-2021 87590 It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.Using the Omada SDN Controller to Manage Omada Devices Across Multiple Locations Via a VPN Connection (Controller 5.0 and Above) 05-05-2023 17174 For example, to enter the show command, you can type “ sh”, then press the TAB key, or type a question mark immediately afterward, like “sh?”, then the switch will automatically complete the interface command. Note that the question mark will not be displayed. If your computer has a serial port (COM), please connect it to the console port (RJ45) of the switch, with the RJ45 console cable.

Feature Filter: Tutto Configuration Guide User Application Requirement Further Assistance Troubleshooting When You Set Up FAQs This guide is intended to provide network administrators with some typical examples of CLI (Command Line Interface) configuration. Normally, all switch ports are member ports of VLAN 1. If you do not want to remove a port from VLAN 1, you need to additionally configure it. Using Omada controller to configure multiple SSIDs with different VLANs on TP-Link Omada EAPs and Switches to work with a non-Omada gateway(Multi-Net NAT supported) 07-07-2023 17569

You can enable Fast Leave by enabling the feature for both the VLAN and the Port when there is only one client connected to the access port.