Bisley Gun Blue 75g Tub

Product Information

Transforms metal surfaces into a deep blue finish, enhancing the appearance and providing rust and corrosion protection. New guns are typically available in blued finish options offered as the least-expensive finish, and this finish is also the least effective at providing rust resistance, relative to other finishes such as Parkerizing or hard chrome plating or nitriding processes like Tenifer. Yes, gun bluing can be touch-up. Minor dings or scratches in the bluing can be repaired using specific touch-up solutions or pens available in the market. 14. Can gun bluing be polished?

Cold blue can be used to blue full firearms, but the results are not comparable to the other methods listed. It is the most economical form of bluing for the hobbyist making it extremely popular and a great weekend project for the tinkerer. However, this method is best used for small parts and touch-ups. Cold-blue is the least durable of the mentioned bluing methods. Therefore, professional gunsmiths do not use cold blue to blue full guns. Gun browning is another method often used to color metal parts on firearms to mimic the finish traditionally found on muzzleloading rifles, pistols, and shotguns. By the 1700s, Colonial gunsmiths had figured out how to achieve that beautiful brown color and preferred to use it on their firearms. The brown color is a product of surface rust forming and being removed repeatedly. This brown sheen reduced the reflection of the bare steel and provided protection against the elements. Rust bluing [ edit ] Acid solution applied to bare metal After boiling rusted parts After eight rust, carding and oiling sessions Rust bluing" and "fume bluing" provide the best rust and corrosion resistance as the process continually converts any metal that is capable of rusting into magnetite ( Fe

Alternative gun bluing methods

It works fine for me and I believe that it’s a proven way to remove the less stubborn scratches and worn spots on rifles, shotguns, pistols, axes, and even other household items like a steel knife. First of all, you have to remove the bluing that was initially there. It may not always be necessary. If you need to, you can use rust remover made of phosphoric acid or white vinegar or the remover that comes with the kit.

Later, when you move your parts from the cleaning solution to your bluing solution, you’ll thank yourself for going ahead and getting your parts prepared. Based on the finish you already have on your gun you can either get a glossy or a matte finish. Means if you have a polished steel surface you will be getting a nice glossy look. However, if it’s a sanded surface the matte finish you will be getting is highly appealing. After cold water rinsing, put the gun parts in boiling water. It’ll boil any remaining bluing solution leftover. Simple parts need to be soaked for 15 to 20 minutes, while complex or decorated parts should be soaked for about 45 minutes. Step #6 Final ProcessWhile using the cleaner in this kit, you need to be a bit careful. Ensure that before you use the bluing liquids, you have wiped away the leftover cleaner completely. Caution: It’s very important to note that the gun must not have any aluminum or any other non-steel parts, even a thin plating. It absolutely must be bare steel. This is because some alloys will react with the salt in the solution and give off extremely dangerous fumes. If raw aluminum goes into the mixture, fumes maybe the least of your worries. It will likely cause an explosion. The gun bluing process

In the end, I would like to say that, as long as you follow the instructions accordingly you will definitely get a good result from any one of the given bluing kits on this list of the best gun bluing kits. Final Polishing: After the last coat has dried, lightly polish the blued surface with fine steel wool or a polishing cloth to achieve a smooth and uniform finish.Learning how to blue a gun is an intricate process that involves applying controlled oxidation to the gun’s metal surface, creating a protective layer that prevents rust and corrosion. This serves a practical purpose and enhances the firearm’s appearance. Make sure to keep these tips in mind: use a cotton T-shirt for large area applications and a cotton ball or swab for smaller areas. Start with 1 gallon of water and add it to a deep fryer that has been thoroughly cleaned. Add 5 ½ lbs of regular table salt to the water. Turn the heat on and give a good regular stirring until it gets very hot and starts to steam. Use a steel tool to stir (remember the fumes).

Parts should be dipped in the bath for 15 minutes and scrubbed while being immersed to remove any dirt, oil, or grease that could get in the way of the bluing process. You can use any of chemical cleaners such as sodium triphosphate, naphtha, denatured alcohol, and acetone. Rinse the cleaning solution in a few minutes. Step #3 Immersing of the Gun Parts in the Bluing Solution

Gun bluing does not directly affect firearm performance as it primarily serves as a protective and aesthetic coating. However, improper bluing techniques may impact the gun’s functionality if not performed correctly. 9. Is gun bluing toxic? This best cold gun bluing kit works perfectly fine for all the gun materials no matter it’s your stainless-steel gun or gunmetal. The delta provision gun cleaning kit is a universal bluing kit meaning that it will maintain and clean all the modern firearms that are available. So, whichever firearm you own, you can have a nice finishing with this bluing kit. Hot bluing methods necessitate a heat source, such as a burner or propane torch, to heat the bluing solution to the correct temperature. Protective Gear