Hammerite Kurust Rust Remover for Metal. Rust Treatment and Rust Converter for Metal Interior and Exterior to Remove Brown Spots - 90ml

Product Information

Republic of Ireland, Channel Islands, Northern Ireland (Carrieritems only) Isle Of Man, Scottish Islands And all off shoreIslands excluding Isle of Wight. It can be top-coated with any Hammerite product, including Hammerite Direct to Rust Metal Paint, in just three hours.

As the white spirit evaporates, the coating grips the surface ever tighter in a “mechanical keying effect”. Hammerite Rust Remover Dip is specially developed for the safe and effective removal of rust from metal items.It was the first sample to show rust reappearing, and by the end of the test period the protection had almost completely disappeared from the unpainted side, and was starting to reappear on the other face too. Once dry, the samples were then doused daily in salty water for four weeks to encourage any corrosion to reappear. Products shown, tagged or featured on YouTube by creators are sold by merchants and are subject to merchant's terms and conditions.

Even on the bodywork a stone chip or scratch can soon grow into a nasty blister, and you need to treat rust properly to stop it spreading. The Neutrarust’s label looks like it means business, with all sorts of approvals from NATO and the Ministry of Defence. To qualify for a refund or replacement, products need to be complete with all components and original packaging. The wax/converter coating is only as good as the performance of the converter, which, as we have seen is not good. Most purchases from business sellers are protected by the Consumer Contract Regulations 2013 which give you the right to cancel the purchase within 14 days after the day you receive the item.

If you are treating a rust bubble on the bodywork, you will want to remove as much of the rust as possible before treating or it will soon reappear under any filler and top coat. EASY TO USE - preparation is simple - just brush away any loose, flaky paint or rust and use a small brush to apply the rust converter directly onto metal. We do our best to represent colours as accurately as possible however screens variations and different surfaces can alter this. On oil or grease contaminated areas, unless the underside is extremely thoroughly cleaned, degreased, and then completely dried, the rust converter will not work.