DYNOMEC DY1000 Locking Wheel Nut Remover Kit, 58.0 mm*270.0 mm*230.0 mm

Product Information

I cleaned both surfaces as best I could, marked the key and the wheel to note the position in which the key engaged, mixed up some araldite and smeared it liberally around the inside of the key. I don't really fancy the "loosening the other bolts and then going for a drive" method to loosen the locking bolt either. Same top spec, all-inclusive capability, but is not supplied with the carry case, instead it comes in a removable LDP foam insert, great for storing in a tool chest or any other suitable storage space.

The tyre garage messed up my locking wheel nut socket and then looked at me like I was going to magic the answer out of the air! If anyone has this type without the washer it is advisable to get them off whilst you can and replace by the current type. At A1 Autozone Limited, we specialise in supplying Garage Consumables and Premium Car Car Products as well as, providing the highest standard of service. Whether you’ve lost the key, broken the key, or never had the key in the first place, the DYNOMEC Locking Wheel Nut Remover Kit has you covered. Introducing the Dynomec Locking Wheel Nut Remover Kit, The ultimate solution for removing virtually all locking wheel nuts on the market.Let's face it, there was a time when alloys were a luxury - now they're fitted to just about every car on the road, and available by the thousand at your local scrappy for peanuts.

The damaged bolt and key are now permanently attached to one another but as they were going in the bin anyway thats no problem and no spanners were harmed in the process. the second type from about 2001 - 2005 have a hardened spinning ring around the outside but otherwise one piece so the cone is part of the bolt . The lad hammered "blade 3" on to the bolt, then had to put his full weight on to end of a 4' breaker bar to loosen it off. If anybody could suggest any other easy, and cheap, method to remove this bolt, I'd be very grateful. Having spent 3 hours yesterday removing 4 of these locking bolts there really is only one way out for you .As it happens it wasn't particularly tight so I can't imagine why the bolt had damaged in the first place, must have been made of chocolate.